Trelock COCKPIT 2 FC 520 Manual page 19

6.5 Entering and changing the PIN anti-theft protection
Use a PIN to protect your bike computer from unauthorised
access. Activation of the bike computer is then only possible
if the correct pin is input. Once the time has been set, you
automatically access the "Change PIN?" window. Here you can
enter your own PIN and, if necessary, subsequently change it. If
you don't wish to use a PIN, press the MODE button. Otherwise,
after pressing the SET button, you will be asked to enter the
old PIN (default setting is "0000"). To this end, press the MODE
button until such time as the appropriate digit appears and
then use the SET button to move to the next digit. PIN input is
monitored. Should the PIN have been entered incorrectly, the
message "Wrong PIN" appears for approx. 3 seconds and you
will be asked to re-enter the PIN. If the PIN is correct, input a
new PIN of your choice as described above. Once the last digit
has been confi rmed via the SET button, PIN entry must be re-
peated. Should the repeat PIN entry be incorrect, you will return
automatically to the "Change PIN?" window.
personal PIN on Page 31 so that it is readily available if required!
Note down your
change PIN?
enter PIN
53