3.2.3
Disassembly of Moving Unit
(1) Removing the Platen Roller
• Remove E-ring (E-4).
• Remove the Platen Gear.
• Remove the two M3×6 [BT] and two M3×6 [ST]
screws and then remove the Side Chassis.
(2) Removing Guide_Assy and Platen BK_Assy
• Remove the four M3×6 [BT] screws.
E-ring (E-4)
Platen Gear
M3×6 [ST]
Side Chassis
M3×6 [BT]
Platen BK_Assy
Guide_Assy
9
PPU-700 Service Manual
Center Chassis
M3×6 [BT]