3.2.2
Disassembly of Feeder Unit
(1) Removing the P-Bracket
• Remove the M3×6 [BT] screw.
• Remove the P-Bracket.
(2) Removing the Upper Cover
• Remove the four M2.6×8 [BT] screws.
(3) Removing the Anti-static Brush
• Remove the four M2.6×8 [BT] screws.
(4) Removing the Drive Unit
• Remove the Drive Unit from the Lower Case.
Drive Unit
7
PPU-700 Service Manual
M2.6×8 [BT]
Anti-static Brush
M2.6×8 [BT]
M3×6 [BT]
Upper Case
Lower Case