Related Manuals for Elation JOY 300
Summary of Contents for Elation JOY 300
- Page 1 Instruction Manual Version 1.23 Elation Professional 4295 Charter Street Los Angeles CA 90058 USA e-mail: Info@ElationLighting.com Web site: www.elationlighting.com...
- Page 2 (V1.23)
-
Page 3: Table Of Contents
Contents Introduction...........................5 1.1 Safety rules ........................6 Installation ..........................7 2.1 Mounting.........................7 2.1.1 Clamps.......................7 2.2 Securing .........................7 2.3 Connectors ........................7 2.3.1 AC Connectors ....................7 2.3.2 DMX ........................7 2.4 Fuse..........................7 The Menu Field ........................8 3.1 DMX- Channel Addressing..................8 3.2 Read outs........................9 3.2.1 Lamp Time 1.....................9 3.2.2 Lamp Time 2.....................9 3.2.3 Life Time......................9... - Page 4 Lamp Installation .......................15 6.1 Safety Rules.........................15 6.2 How to Install New Lamp ....................15 Gobos Replacement......................16 7.1 Safety Rules.........................16 7.2 How to Replace the Gobos..................16 Maintenance........................17 8.1 Mirror and Optical System ..................17 Technical Data / Overview....................18 (V1.23)
-
Page 5: Introduction
1 Introduction Illustration 1-1 (V1.23) -
Page 6: Safety Rules
1.1 Safety rules 0 is a High-Tech Product. To guarantee smooth operation, it is necessary to follow all safety rules. 1. Make sure that the mirror of the 0 , can move without any mechanical problems and that all fan openings are clean and not blocked by anything. 2. -
Page 7: Installation
Installation 2.1 Mounting 0 is fully operational whether it hangs or is mounted to the wall. 2.1.1 Clamps Mount clamps and/or hooks directly to the bracket of the . Please make sure to use right sized clamps and hooks and fit them securely. 2.2 Securing Always use safety cables to secure the 0 , use the eyelet at the rear of the unit... -
Page 8: The Menu Field
The Menu Field Menü Cursor Data- Data+ 3.1 DMX- Channel Addressing Right after turning on the 0 you can see the current DMX- Address. Choose as follows: Count up or down the DMX- Address with the Data + or Data – buttons. To speed up the counting press the cursor button, this will turn on all decimal dots to indicate fast counting. -
Page 9: Read Outs
3.2 Read out the Running Time of Lamp and Unit Select the time level by pressing the Menu key twice. Select the requested time by pressing the Cursor key, 3.2.1 Lamp Time 1 The current lamp time is shown alternating with LA 1. This is the total hours used by the current lamp. -
Page 10: The Test Level
3.4 The Test Level The Test Level makes a selftest procedure possible. Select the Selftest Procedure by pressing the Menu key three times. Start the Selftest program by pressing the Cursor key. The lamp will be started automatically and a selftest procedure with 8 steps will run. To leave the selftest press the Menu key again. -
Page 11: Channel Selection (Overview Table)
Channel selection (Overview table) Channel Description Value in % 1) PAN – High 0..170° 0..255 00..FF 0..100 2) PAN – Low High-Pos .. High-Pos + 0,7° 0..255 00..FF 0..100 3) TILT – High 0..110° 0..255 00..FF 0..100 4) TILT – Low High-Pos . - Page 12 Channel Description Value in % Rot. Gobo, slow - fast CW 128..191 80..BF 51..75 Rot. Gobo, fast - slow CCW 192..253 C0..FD 76..98 Audio Gobo-change slow Audio Gobo-change fast 7) Shutter Shutter closed 0..15 00..0F 0..6 Shutterfrequence slow – fast 16..239 10..EF 7..93...
- Page 13 Channel Description Value in % Call saved programsteps 00..15 00..15 0..6 Set DMX-Values 16..254 10..FE 7..99 14* Next Time Audio – min. Time 0,4 sec 0..04 0..04 0..2 Next Time in 1/10 sec 5..199 05..C7 3..78 Audio – min. Time 1 sec 200..209 C8..D1 79..82...
-
Page 14: Programming
Programming the You can program the 0 in a standalone program within 25 steps. This program can run automatically after turning on the unit. This means you need a DMX Controller for programming but not for running the stand alone program. 5.1 Engage the Program Mode Normal - Mode: Receive standard DMX signal. -
Page 15: Call On The Standalone Program
7) etc. 5.3 Call on the Standalone Program Engage the Send – Mode at the The program starts automatically after turning on the unit. In the display you can see the Next Time for the following step. At the last step the program will jump automatically to the beginning of the program. -
Page 16: Gobos Replacement
Please close the knurled nuts of the HTI/HMD lamp fast. Change the Gobos 0 is fitted with standard Gobos (∅26 mm, picture size 22mm). 7.1 Safety Rules • Unplug AC power connection • Allow to cool (over 30 minutes) • Don’t touch lamp with bare fingers. -
Page 17: Maintenance
Maintenance of the The cleaning of the inner optical System, color filters, color correction filter and lenses should be done by qualified technician only! Contact your local ELATION Dealer for details. Do not use strong detergents, acid etc. for cleaning the case. -
Page 18: Technical Data / Overview
Technical Data / Overview • AC 230V/1,8 AT or AC 115V/3,6 AT • HTI 300 W/DX Lamp with 750 h lifetime or, HMD 300 W Lamp with 3000 h lifetime • Power compensated • DMX 512 Standard • Weight 16 kg •... - Page 19 (V1.23)
Need help?
Do you have a question about the JOY 300 and is the answer not in the manual?
Questions and answers