Assemble The C35 - Siemens C35 series Service Manual

Assemble the C35

STEP 1:
Check that the Lower Housing Assembly, Control Board Assembly and Upper Housing
Assembly are in good order. Check if the Buzzer sealing was installed on the Control Board.
1
N e w U p p e r a n d L o w e r C a s i n g m u s t b e u s e d .
c o n t a c t p i n s m u s t n o t b e d i r t y , d a m a g e d o r b e n t !
I f a n y p a r t i s n o t O . K p l e a s e r e p l a c e i t w i t h a n e w
STEP 2:
Place the Control Board Assembly in the Lower Housing Assembly and then place the keypad
on top of the Control Board as illustrated in PHOTO 2.15. You may insert a battery in this step to
test that the phone can be switch on.
PHOTO 2.15 ASSEMBLE C35 – STEP 2
V1.0
p a r t .
28
A l l