Changing The Print Darkness - Ice Zodiac Plus Operator's Manual

5
6
7

Changing the Print Darkness

If the print darkness is too low, it causes the printed image to appear
faded.
If the print darkness is set too high, the edges of the printed image
appears blurred. This will also overdrive the printhead and shorten its
lifetime.
Choose the lowest value of darkness that achieves a satisfactory
quality print.
To set the print darkness, proceed as follows:
1
2
3
4
Rev AA
Figure 4-15: Print Orientation Settings
Touch the required value from the Options list to select 0°or 180°.
Touch OK to set the new orientation.
Touch the Home button to return to the home page.
Touch the Tools button on the home page.
Touch the Setup button on the tools page.
Touch the Printhead button to open the printhead setup page.
Touch the Print Darkness button to open the print darkness setup
page (Figure 4-16 on page 4-18).
Changing the Position or Appearance of the Print
Zodiac Plus Operator Manual
4-17