Changing Variable Date Information - Ice Zodiac Plus Operator's Manual

Zodiac Plus Operator Manual

Changing Variable Date Information

To change the variable date information, proceed as follows:
1
2
3
4-12 Changing Variable Information
Touch the required job variable to select it from the list of job
variables. The current information is shown in the data window
(Figure 4-9).
Figure 4-9: Default Data Window
If the information in the data window is the information that you
want to print, go to step 6. If you want to change the information,
perform steps 3 to 6.
Touch the data window to display the Calendar page (Figure 4-
10).
Figure 4-10: Calendar Page
Rev AA