Switching The Power On - Ice Zodiac Plus Operator's Manual

Zodiac Plus Operator Manual
2
3
4

Switching the Power On

To switch the printer on, turn the power switch on the CLARiTY
controller to the I (On) position (Figure 3-2).
Power Switch
Figure 3-2: Printer Power Switch
3-2 Switching the Power On
Figure 3-1: Air Pressure Regulator
Read the air pressure displayed on the regulator. It should show a
value of 4.5 bar (63 Psi).
If the dial on the regulator does not display the correct value, lift the
air regulator control knob and turn it clockwise to increase the
pressure, or counterclockwise to decrease the pressure.
Push the control knob down to lock it in position.
Air Pressure Regulator
Rev AA