Chapter 3 - Getting Started; Setting The Air Pressure - Ice Zodiac Plus Operator's Manual

Getting Started
This chapter contains the following topics:

Setting the Air Pressure

The air pressure on the printer should be set to a value of 4.5 bar (63
Psi).
To view and set the air pressure on the printer, proceed as follows:
Rev AA
• Setting the air pressure
• Switching the power on
• Setting the screen orientation
• Starting the printer
• Stopping the printer
• Understanding the printhead LEDs
• Setting the printer time and date
• Setting the language display
• Printing a test image
Caution
AIR PRESSURE SETTING. Do not set the pressure to a different
level without consulting Interactive Coding Systems first. Proper
operation of the machine relies on the accurate setting of the air
pressure.
1 Locate the air pressure regulator (Figure 3-1 on page 3-2). It is
close to the printhead and connected to the printhead by a 4 mm
air line.
3
Setting the Air Pressure 3-1