Panasonic WJ-HD300 series Conversion Manualline page 7

WJ-HD300 S-ATA conversion guide
(17) Attach the S-ATA label, large (for top) to the top panel.
Attach the S-ATA label, small (for front) to the connectors
cover.
Note:
The new HDDs need to be formatted before operation. Refer to the Operating Instructions for detail.
+++++++++++++++++++++++++++++++++++++
Panasonic System Solutions
SATA label(for top)
End of the document
+++++++++++++++++++++++++++++++++
6
Maintenance guide
7-10mm
S-ATA
Approx. 2mm
SATA label(for front)
S-ATA
HD300_SATAConversionGuide_B