Table of Contents
Advertisement
3.Using the Unit
3.3
Taking a Reading
1.
Press the O/I START button to turn the unit on.
The cuff starts to inflate automatically.
Sit in a chair with your feet flat on the floor and place your arm
on a table so that the cuff will be at the same level as your
heart. Keep still and do not talk during measurement.
Note: To cancel a measurement, press the O/I START button
2.
Inflation stops and the measurement starts with deflating. As
the cuff deflates, the heartbeat symbol (
heartbeat.
3.
When the measurement is complete, the arm cuff completely
deflates. Your blood pressure and pulse rate are displayed.
4.
Check the measurement
results.
The unit automatically stores
blood pressure and pulse
rate into its memory. Refer to
"3.5 Using the Memory
Function".
Note: Wait 2-3 minutes before taking another blood pressure
16
to turn the unit off and to release the air in the arm cuff.
measurement. Waiting between readings allows the
arteries to return to the condition prior to taking the
blood pressure measurement.
) flashes at every
Systolic blood
pressure
Diastolic blood
pressure
Pulse display
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M2 Basic and is the answer not in the manual?
Questions and answers
can you get more than the last saved reading
Yes, the Omron M2 Basic can store and display up to 21 measurements.
This answer is automatically generated
@Mr. Anderson How do you get the other readings. I press on the start button for more than 5 secs and it gives me the last reading - how do I get previous ones?