Advertisement
Intl Wolf Conv MW with Grill UCG:Intl Wolf Conv MW with Grill UCG
W O L F C O N V E C T I O N M I C R O W A V E
M I C R O WAV E O V E N
Check to make sure the accessories shown in
the illustrations below are supplied.
Place the turntable support into the
coupling in the centre of the oven floor,
ensuring you place it TOP side up, (TOP is
engraved on one side). It should be able to
freely rotate around the coupling.
Place the turntable on to the turntable
support.
Place the high/low racks onto the turntable
if necessary.
M I C R O W A V E O V E N A C C E S S O R I E S
Turntable
Coupling
F E AT U R E S
A C C E S S O R I E S
N O T E S :
Always operate the oven with the turntable
and support fitted correctly. This promotes
thorough even cooking. A badly fitted
turntable may rattle, may not rotate
properly and damage the oven.
The turntable rotates clockwise or counter
clockwise. The rotary direction may change
each time you start the oven. This does not
affect cooking performance.
When you order accessories, please
mention two details: part name and model
name to your dealer or service agent.
Turntable
support
Square shelf
12/8/08
1:19 PM
Page 13
Low rack
High rack
These racks are used for cooking
in Convection, Dual or Grill mode.
Square tray
13
Advertisement
