Advertisement
Intl Wolf Conv MW with Grill UCG:Intl Wolf Conv MW with Grill UCG
24
W O L F C O N V E C T I O N M I C R O W A V E
E N E R G Y S AV E
M O D E
Your oven comes set for the energy save
mode. If you do nothing for 3 minutes after a
preceding operation, i.e. closing the door or at
the end of cooking, the power will go off auto-
matically. To restore power on, open the door.
E X A M P L E
To start the energy save mode, (the current
time is 23:35):
1)
Make sure the correct time appears on the
display.
2)
Press the CLOCK SETTING button once.
x1
3)
Adjust the display to 0 by rotating the
TIMER/WEIGHT knob.
4)
Press the
+30 button. The power will be
off and the display will show nothing.
x1
NOTE:
You can press the CLOCK SETTING button
twice at step 2.
12/8/08
1:19 PM
Page 24
O P E R AT I O N
M I C R O W A V E
P O W E R L E V E LS
Your oven has 5 power levels. To choose the
power level for cooking, follow the advice
given in the recipe section. Generally the
following recommendations apply:
900 W used for fast cooking or reheating e.g.
soup, casseroles, canned food, hot beverages,
vegetables, fish, etc.
630 W used for longer cooking of dense foods
such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as cheese
sauce and sponge cakes. At this reduced
setting, the sauce will not boil over and food
will cook evenly without over cooking at the
sides.
450 W for dense foods which require a long
cooking time when cooked conventionally, eg.
beef dishes, it is advisable to use this power
setting to ensure the meat will be tender.
270 W (Defrost setting) to defrost, select this
power setting, to ensure that the dish defrosts
evenly. This setting is also ideal for simmering
rice, pasta, dumplings and cooking egg
custard.
90 W for gentle defrosting, eg. cream gateaux
or pastry.
W = WATT
T O S E T T H E P O W E R L E V E L
1)
Rotate the COOKING MODE dial to the
microwave setting.
2)
Rotate the TIMER/WEIGHT knob clockwise
or counter-clockwise to select cooking time.
3)
Press the MICROWAVE POWER LEVEL
button until the desired power level
appears on the display. (If the MICROWAVE
POWER LEVEL button is touched once,
will be displayed. If you miss your
desired level, continue pressing the
MICROWAVE POWER LEVEL button until
you reach the level again).
4)
Press the
+30 button.
NOTE:
If the power level is not selected, 900 W is
automatically set.
Advertisement
