Set Time; Turn On; Play From Bluetooth Device; Bluetooth Reset - Philips AJT600 User Manual

Set time

1
Rotate the Third Knob to "SET TIME" to
activate clock setting mode.
» Hour and minute digits blinks.
2
Rotate the First Knob to adjust the hour.
3
Rotate the Second Knob to adjust the
minute.
4
Press OK on the First Knob to confirm.
» The setting time is displayed.
5
Rotate the Third Knob to CLOCK after
setting.
» The hour and minute digits stops
blinking.

Turn on

The clock radio turns on automatically once
your plugged in.
7 EN
4 Play from
Bluetooth
device
Note
•
The effective operation range between the Bluetooth
speaker and the paired device is approximately 10
meters (30 feet).
•
Keep this Bluetooth speaker away from other electronic
devices that may cause interference.
•
Make sure that the Third Knob switches to CLOCK
before setting.
1
Press SOURCE repeatedly to select
Bluetooth source.
on the display panel flashes.
»
2
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3
Select "AJT600" displayed on your device
for pairing.
» If connection is successful, the
Bluetooth speaker beeps twice and
steadily on.
4
Start music play on your Bluetooth device.
» If Bluetooth disconnected, the music
will pause. Press
device to start play again.

Bluetooth reset

In Bluetooth mode, press OK on the first
knob for over 5 seconds to erase all pairing
informations.
» "BT RESET" displayes on the panel.
• The Bluetooth speaker enters
Bluetooth mode automatically after
erase completed.
on the Bluetooth