Download Print this page

Get Started; Connect Power - Philips AJT600 User Manual

Hide thumbs

Advertisement

3 Get started

Always follow the instructions in this chapter in
sequence.

Connect power

The unit can only be powered by supplied AC
power. Batteries are only used for time and
alarm backup if not connected with AC power.
Option 1: AC power
Warning
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Connect the AC power cord to the wall socket.
Tip
To save energy, turn the unit off after use.
Option 2: Battery power
Caution
Batteries contain chemical substances, so they should
be disposed of properly.
Note
Batteries are not supplied with the accessories.
bAt shows on the display when the battery level is low.
1
Open the battery compartment.
2
Insert 2 batteries (type: 1.5V LR6/AA) with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
EN
6

Advertisement

loading

  Related Manuals for Philips AJT600

This manual is also suitable for:

Ajt637Ajt600/37