Product information is subject to change without prior
Rated Output Power
Dimensions - Main
Unit (W x H x D)
Weight - Main Unit
HFP v1.5, AD2P v1.2,
10 m (Free space)
Input: 100-240 V ~,
2 x AA batteries
195 x 99 x 98 mm
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
Ensure that the power cord is connected
Ensure that there is power at the power
Ensure that the batteries are installed
No response from the Bluetooth speaker
Disconnect and reconnect the AC power
plug, then turn on the Bluetooth speaker
Check if you have selected the correct
Make sure that your Bluetooth device is
within the effective operation range.
Alarm does not work
Set the clock/alarm correctly.
Clock/alarm setting erased
Power has been interrupted or the power
plug has been disconnected.
Reset the clock/alarm.