Table of Contents
Advertisement
_______________________________________________________________
Scan mode
Select "Search" to search for channels on the selected satellite. In the next
submenu first select the type of search function for the selected satellite: FTA,
ALL, FTA+NIT, ALL+NIT
FTA (Free-To-Air): Search all free-to-air channels (not encrypted channels) on the
selected
satellite.
ALL: Search all channels (free-to-air as well as encrypted channels) on the
selected
satellite.
FTA + NIT: Search all free-to-air channels belonging to a channel group on the
selected
satellite.
ALL + NIT: Search all free-to-air as well as encrypted channels belonging to a
channel group on the selected
After you have made your choice, choose between "Add" (to add found channels
at the end of the channel list) or "Overwrite" (to overwrite found channels with
old channel frequencies) and then press the
The search status is shown on the
1.2 Edit Satellite
In the installation menu of the antenna settings you can edit the previously
selected satellite by pressing the
selected satellite.
The following color buttons are available in the installation menu of the antenna
settings to edit the satellite:
YELLOW Add Satellite
Press the
YELLOW BUTTON
satellite in the following menu by opening the alphabetic keyboard with the
"VOL►"
button. Choose the proper longitude as well as east / west orientation.
The new satellite of the list is added by pressing the
BLUE Delete Satellite
Press the
BLUE BUTTON
satellite.
screen.
„VOL◄"
to add a new satellite. Enter a name for the new
to remove the selected satellite from the list.
"OK"
button to begin the search.
button. Here you can rename the
"OK"
button.
1. Installation
11
Advertisement
Table of Contents
