Edit Satellite; Transponder List - FaVal MERCURY S100 Operating Instructions Manual

_______________________________________________________________
FTA, ALL, FTA+NIT, ALL+NIT
FTA (Free-To-Air): Search all free-to-air channels (not encrypted channels) on
the selected satellite.
ALL: Search all channels (free-to-air as well as encrypted channels) on the
selected satellite.
FTA + NIT: Search all free-to-air channels belonging to a channel group on the
selected satellite.
ALL + NIT: Search all free-to-air as well as encrypted channels belonging to a
channel group on the selected
After you have made your choice, choose between "Add" (to add found channels
at the end of the channel list) or "Overwrite" (to overwrite found channels with
old channel frequencies) and then press the "OK" button to begin the search.
The search status is shown on the

1.2 Edit Satellite

In the installation menu of the antenna settings you can edit the previously
selected satellite by pressing the "VOL◄" button. Here you can rename the
selected satellite.
The following color buttons are available in the installation menu of the antenna
settings to edit the satellite:
YELLOW Add Satellite
Press the YELLOW BUTTON to add a new satellite. Enter a name for the new
satellite in the following menu by opening the alphabetic keyboard with the
"VOL►" button. Choose the proper longitude as well as east / west orientation.
The new satellite of the list is added by pressing the "OK"
BLUE Delete Satellite
Press the BLUE BUTTON to remove the selected satellite from the list.

1.3 Transponder List

By pressing the GREEN BUTTON in the installation menu of the antenna settings
the list of previously selected satellites is opened in the transponder list. In this
satellite.
screen.
1. Installation
button.
11