Set A/V Output; Osd Settings - FaVal MERCURY S75 Operating Instructions Manual

_______________________________________________________________

4.2 Set A/V output

In this menu item you can tune the picture on your TV set.
TV norm
Select the output format here which your color television set supports. You can
select among PAL, NTSC, SECAM or AUTOMATIC.
Video Output Mode
Select the video output mode of your receiver here. You can select between RGB
and CVBS.
Screen Mode
Select whether your receiver should display the screen mode at 4:3 or 16:9 here.
With the "16:9" button on your remote control you can also adjust the format of
the current program on your TV set during the program.
_____________________________________________________________________
16:9: Widescreen format, used among other things with films (can only be
selected if your television supports this format).
RF Type (optional)
Select the output format here which should be displayed on the modulator.
RF Channel (optional)
Select which UHF channel your modulator should transmit the signals to the TV
set over here.

4.3 OSD settings

In this menu item you can adjust the OSD menu of the receiver.
The OSD menu (On Screen Display) is the colored menu which overlays the TV
screen and displays information (e.g., EPG).
Menu language
Choose the menu language of the OSD menu.
Menu transparency
Choose the degree of transparency of the OSD menu.
Menu display duration
Choose the display duration of program information while changing.
4. System settings
15