Eliminating Malfunctions - FaVal MERCURY S75 Operating Instructions Manual

Eliminating malfunctions

_______________________________________________________________
Eliminating malfunctions
Symptom
The display does not work.
No tone, picture, LED on
the receiver.
No tone or picture.
The TV set has no picture.
Bad picture, error
The remote control does
not function.
If the malfunction is not eliminated, please contact your specialized dealer.
20
Possible cause and remedy
The power cable is not connected.
Connect the power cable to the power socket.
The receiver is in standby.
Press the "POWER" button. The receiver switches on
and the program will be shown on the TV screen.
The antenna is not adjusted to the satellite.
Adjust the antenna properly.
No signal or weak signal.
Check the cable connection from the LNB to the
receiver and from the receiver to the connected
devices.
Adjust the antenna.
The system is not properly connected.
Check the SCART or HF cable connection.
The TV set is not in AV mode.
Switch the TV set to the respective AV input.
The antenna is not adjusted to the satellite.
Adjust the antenna.
The LNB is defective.
Replace the LNB.
The batteries are drained.
Replace the batteries with new ones.
The remote control is incorrectly aimed.
Aim the remote control to the front of the
receiver and make sure that nothing is between
the remote control and receiver.