Table of Contents
Advertisement
ASSEMBLY
G
Position S-Rod upright.
1
G
Rotate the LOCKING COLLAR fully in the
2
counterclockwise direction.
G
Insert your finger inside the tube and make sure the
3
INTERNAL CAM LOCK is flush with the inside of the tube.
S-ROD
G
5
G
Insert the MIDDLE STEM into the S-ROD,
4
with the SILVER BUTTON pointed upward
G
Rotate the MIDDLE STEM until the SILVER BUTTON
5
locates in the hole.
G
Twist the LOCKING COLLAR fully in the clockwise
6
direction until it locks.
G
Repeat this process on the LOWER STEM.
7
G
Using the BOLT and KNURLED KNOB, attach the
8
SEARCHCOIL to the LOWER STEM.
G
Adjust the LOWER STEM to a length that lets you maintain
9
a comfortable upright posture, with your arm relaxed at your
side, and the SEARCHCOIL parallel to the ground in front of
you.
G
Wind the CABLE securely around the STEMS.
1 0
G
Connect CABLE PLUG to housing.
11
Do not twist the Cable or Plug. Turn Locking Ring only.
Use minimal finger pressure to start the threads. Do
not cross-thread. When the Locking Ring is fully
engaged over the threaded connector, give it a firm
turn to make sure that it is very tight. When the
Locking Ring is fully engaged over the threaded
connector, it may not cover all of the threads.
G
Tighten both LOCKING COLLARS.
1 2
*
Note: Very tall users can purchase the optional Extended Lower Stem (TUBE5X), for extended reach.
Caution:
Forcing in MIDDLE STEM with CAM LOCK raised may form a burr on
camlock. If this happens, remove burr with knife to allow insertion.
LOCKING
COLLAR
CAM LOCK
SILVER BUTTON
S-ROD
MIDDLE STEM
G
2
INTERNAL
G
3
MIDDLE
G
4
STEM
G
4
5
- Quick Links:
- Quick-Start Demonstration
Hide quick links:
Advertisement
Table of Contents
