Advertisement
Load PetChatz Treatz
1
2
Remove cap
on PetChatz
Treatz cup
(treat cup).
Remove white cover.
PETCHATZ TREATZ HINTS:
Over time Treatz can start to bridge together and get
stuck in the treat cup. We recommend that you shake
treat cup once each day.
Low treat level indicator will be triggered when there
are less than 30 treats left in the cup.
Only use full cups of PetChatz Treatz to ensure Low
Treat Indicator function.
PetChatz Treatz® by NutriSource® have a unique
shape and size and are made with a proprietary
recipe specifically designed for use in the PetChatz
system. Using any other treat may clog the system or
cause other damage (and void the One Year Limited
Warranty).
Periodically, two treats may be dispensed or none at all
when the treat dispense button is depressed. Simply
16
depress the treat dispense button again to ensure a
treat is dispensed.
3
Remove the
entire fresh-
ness seal from
the treat cup.
4
5
Place the treat hopper
Holding the treat
on top of the treat
hopper handle, turn
cup pressing firmly
the hopper upside
to ensure the cup is
down (so that the treat
completely seated in
cup is on top of the
the treat hopper.
treat hopper) and place
loaded treat hopper
into the PetChatz unit.
Make sure the treat
hopper is seated flush
and coupled to the
hopper coupling.
Replace the cover
• Align the white cover with the wall-mounted PetChatz unit.
o The square cutout should be positioned at the bottom of the unit.
o The side tabs should be aligned with the slots on the left and right
sides of the wall-mounted PetChatz unit.
• Gently push the white cover into position over the PetChatz unit.
• If properly installed, a click should be heard for each side (left and
right).
6
Reset the Low Treat
Indicator mechanism
by pressing and
holding the Manual
Treat Dispense button
for 3 or more seconds.
Once you release the
button you will hear an
audible beep and see
a message indicating
that the treat count
has been reset.
17
Advertisement
