Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PetChatz Pet Care Product
Summary of Contents for PetChatz Pet Care Product
- Page 1 PetChatz.com...
-
Page 2: Tools Required For Installation
Phillips screwdriver Stud Finder (optional) Drill/drill-bit (optional) Wireless Requirements ACCESS LATCH DISPLAY PetChatz® connects easily to your home wireless network. High-speed (broadband) internet is required. Connection speeds may affect video quality. CAMERA We recommend upload speeds of at least 2 Mbps. If you are MOTION &... - Page 3 PetChatz unit (1) Mounting bracket (1) and mounting bracket screws (3) Note: Mounting bracket and mounting bracket screws come attached to the PetChatz unit Power supply plug (1) Wall mount installation hardware: 2” wood screws (3), drywall anchor (1) and drywall anchor screw (1) Note: Located under white cover.
- Page 4 Mount the Wall Bracket PetChatz cannot guarantee unit and pet safety if these installation instructions are not followed. Identify your PetChatz mounting location and disconnect power to the electrical outlet at the main fuse box. Identify the location of the wall...
- Page 5 Mount the Wall Bracket PetChatz cannot guarantee unit and pet safety if these installation instructions are not followed. Place mounting bracket over Using a pencil, mark the screw Screw the drywall anchor in the With wall mount bracket in the your electrical outlet.
- Page 6 USB type B connector and port (see Figure A). Insert the type B cord into the type B port. PetChatz cannot guarantee unit and pet safety if these installation instructions are not followed. • Plug the power adaptor cord into your wall’s electrical outlet.
-
Page 7: Connect To Your Wireless Network
We recommend threading the zip tie through the two outer openings for greater stability. The first time the PetChatz unit is powered on, the unit will automatically boot into “Configuration Mode” allowing Secure the zip ties. for immediate network configuration. - Page 8 Pet name, breed, age, etc. profile addition. will need to restart the PetChatz unit and press the manual treat button when List. the PetChatz unit displays the message “PetChatz starting in 5, 4…”...
-
Page 9: Replace The Cover
The side tabs should be aligned with the slots on the left and right Warranty). sides of the wall-mounted PetChatz unit. • Gently push the white cover into position over the PetChatz unit. Periodically, two treats may be dispensed or none at all when the treat dispense button is depressed. Simply •... - Page 10 PetChatz unit. Other scents may be used on the scent pad. • Gently push the white cover into position over the PetChatz unit. We recommend consistent, calming scents not • If properly installed, a click should be heard for each side (left and normally found in the home.
- Page 11 Silent your pet. Your pet will not initially respond Log into your Select the PetChatz unit you would like to call. Mode. You will then hear an audible tone or walks away during PetChatz account.
- Page 12 Some decorative wall plates may need to be removed for the proper Treat Dispense” button located on the mounting of PetChatz. Removing wall plates requires some attention to front of the unit (as shown in Figure A). basic safety precautions. However, with reasonable care a homeowner •...
- Page 13 For more information and troubleshooting guide, go to www.PetChatz.com/Explore. support@petchatz.com (855-444-6544)
Need help?
Do you have a question about the Pet Care Product and is the answer not in the manual?
Questions and answers