Opel Vivaro Conversion Manualline page 57

OPEL VIVARO (X82)
1.11 – FRONT & REAR SUSPENSION / BRAKES / ELECTRONIC STABILITY CONTROL
REAR SUSPENSION
The rear suspension is a Panhard bar type.
Three different bi-tilt springs are available. Their stiffness varies depending on the vehicle:
Panel van: 28-74,8 N/mm
-
Combi :
-
Panel van L2 with reinforced suspension (criterion CMB, special build): 56-93.75 N/mm
-
(See also chapter 2.2 – AXLE-LOAD DISTRIBUTION)
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status February 2014
31-70 N/mm
57