Opel Vivaro Conversion Manualline page 48

OPEL VIVARO (X82)
1.10 – FUEL SUPPLY SYSTEM / ADDITIONAL HEATER / AIR CONDITION /
EXHAUST SYSTEMS
Ø 8
B
For information:
The various snap-fit connections used are from the companies RAYMOND or LEGRIS.
Fuel system.
Fuel is sucked from the bottom of the fuel tank, so there is a risk of emptying the tank in stationary
mode when on fuel reserve level.
With the engine running, the pressure inside the pump return system is high (about 0.5 bar), it may be
necessary to add a pressure reduction device to the heater supply system (after the Tpiece
connection).
It is prohibited to drill the fuel tank.
Only connect to the return pipes designed for this purpose; see § 5.1
For all types of connection, the bodybuilder must check that the device is able to withstand a
pressure four times the operating pressure (or approximately 4 bar).
The device must be able to withstand a temperature of between 70 and 80°.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
up-to-date data on body guidelines (online body guidelines). Data status February 2014
E
D
C
1
Ø 8
A
48