Table of Contents
Advertisement
Quick Links
2X8 HDMI 1.3 Extender / Splitter over
Single CAT5
Model #: HDM-C5SP-8
© 2009 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Advertisement
Table of Contents
Related Manuals for Avenview HDM-C5SP-8
Summary of Contents for Avenview HDM-C5SP-8
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Introduction ........................... 4 Package Contents ........................6 Before Installation........................6 Panel Description ........................7 1.7.1 Rear Panel ..........................7 IR Control ..........................7 1.7.3 Dip Switch for EDID & Audio Settings ................... 8 Installation ..........................9 Section 2: Specifications ........................10 www.avenview.com... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview HDM-C5SP-8 HDMI 1.3 Extender / Splitter over CAT5 has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM-C5SP-8 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Introduction The Avenview HDM-C5SP-8 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost anywhere. - Page 5 www.avenview.com...
-
Page 6: Package Contents
Package Contents Before you start the installation of the converter, please check the package contents. HDM-C5SP-8 Rack-mounting ears Power Adapter User’s Manual Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. -
Page 7: Panel Description
HDMI INPUT 1 or HDMI INPUT 2 that is in play SOURCE SELECT 1 Select HDMI INPUT 1 to be the input source SOURCE SELECT 2 Select HDMI INPUT 2 to be the input source Mute on/off (audio off, video on) on all eight output ports www.avenview.com... -
Page 8: Dip Switch For Edid & Audio Settings
HDTV sets to respective HDMI inputs via HDMI cables. Then please wait for 20 seconds for completing the EDID learning procedure. If you want to learn the EDID from another HDTV, you must set pin-1 and/or pin-3) at OFF[ ] first and repeat this procedure all over again. www.avenview.com... -
Page 9: Installation
1. Turn off all devices including monitors / TV 2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM-C5SP-8 3. Connect the receiver HDM-C5-3-R or HDM-C5-R-M to HDM-C5SP-8 from RJ45 Out with CAT5 / CAT6 cable 4. -
Page 10: Section 2: Specifications
Section 2: Specifications Item Description Units HDM-C5SP-8 Unit Description 2x8 HDMI 1.3 Transmitter / Splitter over CAT5 / CAT6 HDMI Compliance HDMI 1.3c HDCP Compliance Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60... - Page 11 LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended. 7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1] generally can produce better transmission performance among all HDMI inputs. www.avenview.com...
- Page 12 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the HDM-C5SP-8 and is the answer not in the manual?
Questions and answers