Touch Revolution M17A Series User Manual page 9

5. Take the optional cable cover and screw from the accessory box. Position all cables under
the cover lip as seen in the step 5 diagram.
6. Using a Philips Head screwdriver, insert the screw (CBM M3x6) into the cable cover and
monitor as seen in the step 6 diagram.
7. Re-attach the stand back cover to the LCD stand by pressing fi rmly until the tabs snap
into place as seen in the step 7 diagram. You may also keep the cables in order by using
the cable organizer.
Step 5
Step 6
Step 7
6