Table of Contents
Advertisement
Touch Screen Driver Installation
The M17A Series is available with USB connection. Touch drivers can be downloaded at
www.touchrev.com.
Please Note:
1. The M17A Series is Microsoft
use the USB touch screen interface. No additional software driver is required for general
operation of the touch screen.
2. For M17A Series, the system requires 15 seconds for Windows 7 to install/uninstall the
touch drivers while turning power on/off or plugging/unplugging USB cable.
M17A Series Calibration Instructions:
Calibrating the touch screen in Windows 7:
1. Tap the Start button, Control Panel and then Hardware and Sound.
2. Under Tablet PC Settings, tap Calibrate the screen for pen or touch input.
3. On the Display tab, under Display options, tap Calibrate and then Yes to allow the
program to make changes.
4. Follow the on-screen instructions to calibrate the touch screen.
®
®
Windows
HID (Human Interface Device) compatible if you
18
Advertisement
Table of Contents
Need help?
Do you have a question about the M17A Series and is the answer not in the manual?