Transport And Storage (Fig. E) - Tunturi Go RUN 30 User Manual

EN

Transport and storage (fig. E)

W W ARNING
– Before cleaning and maintenance, remove the mains plug from the
– Carry and move the equipment with at least two persons.
– Make sure that there are no other persons or objects under the
– When folding the folding the equipment, make sure that you hear
CAUTION
– Before folding the equipment, make sure that the incline is 0%. If
1. Move the equipment as shown (fig. E3). Move the equipment and carefully put
the equipment down. Place the equipment on a protective base to prevent
damage to the floor surface. Move the equipment carefully over uneven
surfaces. Do not move the equipment upstairs using the wheels, but carry the
equipment by the handlebars.
2. Store the equipment in the upright position (fig. E2). Store the equipment in a dry
place with as little temperature variation as possible.
28
wall socket.
equipment.
the equipment lock into position to prevent the equipment from
dropping back down.
the incline is not 0%, folding will damage the mechanism.
RUN 30