Tunturi Go RUN 30 User Manual page 20

EN
C C AUTION
– Keep the console away from direct sunlight.
– Dry the surface of the console when it is covered with drops of
– Do not lean on the console.
– Only touch the display with the tip of your finger. Make sure that
NOTE
– The console switches to standby mode when the equipment is not
start key for 1 second till the light turns on and then release the start
button to resume the training. All the training data will be re-started.
Explanation of buttons
Button
START/STOP
MODE
ENTER
SPEED +/- buttons
SPEED quick buttons
INCLINE +/- buttons
INCLINE quick buttons
20
sweat.
your nails or sharp objects do not touch the display.
used for 10 minutes. To leave the energy saving mode, please press
Explanation
Press the button to start the training. Press the button
again to pause the training (max. 4 minutes). Press the
button again to continue the training. Press and hold
the button to stop the training.
Press the button to show the value for a specific item:
time, distance, calories, pulse, laps and scan (items
one after another).
Press the button to confirm your selection.
Press the buttons to set the speed.
Press the buttons to set the speed to the mentioned
value.
Press the buttons to set the incline.
Press the buttons to set the incline to the mentioned
value.
RUN 30