Selecting The Input Signal - Fujitsu B23T-7 Operating Manual

Select OSD language
When an OSD menu button is activated for the first time, the language selection window will appear:
► Press the button or the
► Press the button to confirm.
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO

The message ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Mode
Color
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.

Selecting the input signal

► Press the INPUT
► Press the button or the
► Press the button to confirm or the
This setting window can also be called up when the OSD menu is locked.
Adjusting the volume
► Press the button to open the Volume setting window.
► Press the button or the
► Press the button to activate/deactivate the mute function.
► Press the button to close the menu.
Fujitsu
button to choose the desired language.
button to switch the ECO operating mode on or off.
Office
6500 K
reduced
button to open the Input select setting window.
button to select the desired monitor connection (VGA, DVI or DP).
button to set the desired volume for the built-in speakers.
button to cancel.
Operation
23