Nintendo Wii Operation Manual page 9

S y s t e m S e t u p
Mounting the Sensor Bar Above the Screen
1. Remove the protective film from the foam pads 2. For additional stability, you can add adhesive
on the bottom of the Sensor Bar. backed foam tape from the supplied sheet.
• The front of the Sensor Bar should be
aligned close to the front of the TV.
14
3. Mount the Sensor Bar to the top of the TV.
• The centre of the Sensor Bar should be
aligned with the centre of the TV.
Mounting the Sensor Bar Below the Screen
1. Remove the protective film from the foam pads 2. For additional stability, you can add adhesive
on the bottom of the Sensor Bar. backed foam tape from the supplied sheet.
• The front of the Sensor Bar should be
aligned with the front of the surface
the TV is sitting on.
3. Mount the Sensor Bar to the front edge of the
surface the TV is sitting on. Do not place the
Sensor Bar below the surface that the TV is
sitting on; for example, on shelves below
the TV.
• The centre of the Sensor Bar should be
aligned with the centre of the TV.
15