Brother MFC-235C User Manual page 101

Error Message
No Paper Fed
No Response/Busy
Not Registered You tried to access a Speed Dial
Out of Memory
Paper Jam
Print Unable
XX
Scan Unable
XX
Unusable Device A broken device has been
Downloaded from ManualsPrinter.com Manuals
Cause
The machine is out of paper or
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The number you dialed does not
answer or is busy.
number that is not programmed.
The machine's memory is full.
Paper is jammed in the machine.
The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
The machine has a mechanical
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
connected to the USB direct
interface.
Troubleshooting and Routine Maintenance
Action
Do one of the following:
Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
Remove the paper and load it again and then
press Mono Start or Colour Start.
See Printer jam or paper jam on page 93.
Verify the number and try again.
Set up the Speed Dial number. (See Storing
Speed Dial numbers on page 45.)
Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try again.
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows or Printing and Faxing for
®
Macintosh in the Software User's Guide on the
-
CD ROM.)
Remove the Jam Clear Cover (at the back of the
machine) and pull out the jammed paper. See
Printer jam or paper jam on page 93.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 92 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 92 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Unplug the device from the USB direct interface,
then press Power Save to turn the machine off
and then on again.
B
91