Installing The Machine - Electrolux W475H Installation Manual

26

Installing the machine

To install the machine:
• Remove the transport packaging
• Remove the front panel.
• Remove the machine from the transport pallet
and locate it on the bolts.
Always lift the ma ch ine by the chassis, never
by the door or door handle.
• Check that the machine is level and steady
12
at all four corner mounting points. Adjust the
level by using stain less or galvanized steel
washers or shims be tween the machine and
the floor. The wash ers must be of a size to
cover the support sur face.
• Fit the washers and self-locking nuts supplied
13
with the machine and tighten securely.
• To tighten the nuts we recommend to use
14
a rachet wrench, especially in the right rear
corner.
During the first several weeks of use, check and
tighten the nuts (as necessary) frequently. Conti-
nue to check them periodically, thereafter.
IMPORTANT NOTE:
Failure to closely follow the instructions provided
in this manual may result in severe damage to
the machine, and the risk of personal injury. The
manufacturer is not responsible for damage or
injury resulting from improper installation.
Installation
12
13
14
5463
5464
5951, 5952