How To Install Your Monitor Hardware - BenQ FP785 User Manual

How to install your monitor hardware

3
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the monitor and remove the stuff filling in
the seams. Then place the monitor face down on a
stable surface and release the locks to detach the back
cover.
Place the foam packing sheet from the monitor on
the flat surface to prevent damage to the bezel.
2. Connect the signal cables (D-Sub and DVI-D) to the monitor as shown.
3. Connect the other end of the signal cable to your
computer as shown.
How to install your monitor hardware 9