How To Install Your Monitor Hardware - BenQ FP72V User Manual

How to install your monitor hardware

3
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the monitor and place the monitor on the
desk as illustrated.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
2. Adjust the viewing angle.
Lift the screen upward and then pull the screen forward
until it achieves your optimal viewing angle.
For more information about the adjustment of the
viewing angle, refer to "
While angling the screen, watch the space between
the monitor and the stand plate to avoid any possible
injury with your fingers.
You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
8 How to install your monitor hardware
Viewing Angle Adjustment
".