Table of Contents
Advertisement
Installing the Scanner Rack
Installing the Scanner Rack
You will need a phillips head screwdriver to perform this installation
1.
Open the Scanner Rack carton.
2.
Ensure that the following parts are included in the carton:
1.
5.
1.
Right Leg
2.
Left Leg
3.
Right Support
4.
Left Support
5.
Table Top
2.
6.
9.
6mm Hex Key, not shown
32 Screws (M4 x 10), not shown
8 Hex Screws, not shown
8 Lock Washers, not shown
8 Flat Washers, not shown
4.
7.
10.
6.
Rear/Bottom Plate with casters
7.
Spacer Bar
8.
2 Braces
9.
2 Stabilizing Feet
10. 2 Bumpers
Setting Up the DP-C106
3.
8.
1-39
Advertisement
Table of Contents
