Table of Contents
Advertisement
Setting Up the DP-C106
Making a Test Copy from the Scanner
For a quick overview of the Scanner Control Panel, refer to
the DP-C106
1.
Ensure that READY is displayed on the Printer Control Panel Screen.
2.
Lift the Scanner Cover and place an original on the Document Glass.
3.
Press the Copy button to enter Copy mode.
4.
Press the Start button on the Scanner Control Panel.
After a moment the copy is delivered to the Output Tray on the top of the
Printer.
5.
Remove the original from the Document Glass.
The Next Step
Perform one of the following steps:
•
If you are adding memory to the Printer, go to the
Printer
•
If you are adding memory to the Scanner, go to the
the Scanner
•
If you are not adding memory, go to
section of the Operating Instructions.
1-68
section of the Operating Instructions.
procedure.
procedure.
Copy button
Adding Memory to the
Adding Memory to
Getting to Know the DP-C106
Printing the Test Page
Getting to Know
Start button
Advertisement
Table of Contents
