Subwoofer - HP ENVY 17 Maintenance And Service Manual

Subwoofer

Description
Subwoofer (includes cable)
Before removing the subwoofer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a.
b.
c.
d.
e.
Remove the subwoofer:
1. Release the wireless antenna cables from the clips built into the subwoofer (1) and the base
enclosure (2).
2. Remove the three Phillips PM2.5×5.0 broad head screws (3) that secure the subwoofer to the
base enclosure.
ENWW
Downloaded from LpManual.com Manuals
Battery on page
Hard drive cover (see Primary hard drive on page
memory module compartment cover (see
Keyboard (see Keyboard on page
Top cover (see Top cover on page
System board (see System board on page
37), and then remove the following components:
38)
Memory module on page
50)
52)
60)
Component replacement procedures
Spare part number
603800-001
42).
69