HP ENVY 17 Maintenance And Service Manual page 47

2. Pivot the front edge of the hard drive cover upward.
3. Remove the hard drive cover. The hard drive cover is included in the Plastics Kit, spare part
number 603795-001.
4. Disconnect the primary hard drive cable from the system board.
5. Use the Mylar tabs to remove the primary hard drive from the computer.
6. If it is necessary to replace the primary hard drive bracket, remove the four Phillips PM3.0×3.0
screws (1) that secure the bracket to the primary hard drive.
ENWW
Downloaded from LpManual.com Manuals
Component replacement procedures 39