Transfer Sd Card; Import Model; Export Model; Update Firmware - Spektrum DX18 Instruction Manual

EN

TRANSFER SD CARD

Import Model

To import a model already on the SD Card, insert the SD Card
and select Import Model, then select the model you would like to
import into the DX18 from the SD Card. Confirm that the model
on the card will be imported into the model selected on the
transmitter. Confirming the model will be imported will overwrite
any current data on that model. Select an empty model, or one
that can be deleted.
Import All Models
To import all models from the SD Card, select Import All Models,
and then confirm by selecting IMPORT.
NOTICE: This function overwrites the model memories. Ensure
that the models currently in your transmitter are saved on an
SD card separate from the transmitter before performing this
function.
1) Select the model number you wish for the imported mode,
using the Model Select screen.
2) Go to the SD menu. Insert the SD card. Select option
"Import Model."

Export Model

This function is used to export a model to the SD Card. You can
change the name of the model before saving on the SD Card.
Select EXPORT to export the model to the SD Card. If there is
already a model with the name on the SD Card, you can either
confirm or Cancel to export the model. Confirming export for the
same model name will overwrite the existing data, deleting the
previously saved data.

Update Firmware

This is used to install AirWare from the Spektrum Community
site. To install, save the AirWare onto the SD Card, put the
SD Card in the DX18, and select Update Firmware. Select
the file from the list that you wish to install, and then confirm
installation.
20
3) Scroll down to the model you wish to import and press the
roller.
4) The Main Screen will show. The model number will be the
number you selected and the model configuration will be the
one from the file.
You can import a model to any location you want. If you prefer to
use Import All, you can use your PC to rename the SPM file. The
first two digits (01 to 50) are the destination model number. Your
SD card can only contain 50 models. Save files to folders on the
card then remove from the card all unused models. Files are
selected by their position in the directory table.
Export All Models
To export all models to the SD Card, select Export All Models.
Confirm by selecting EXPORT. If there is already a model with
one of the names on the SD Card, you can either confirm or
Cancel to export the models.
AirWare will Auto-Update by putting the SD Card in the DX18
with an AirWare update on it and powering on the DX18.
Screens will show loading progress. Loading times vary,
dependent on the amount of data in the update. Information is
available on the website for each AirWare update so you can see
descriptions of what is included. Updates must be installed in
order of release to prevent software conflicts. Always back up
model memories separately before installing an update
to your transmitter.
SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL