Table of Contents
Advertisement
This section contains instructions for performing the inspection, lubrication, and maintenance proce-
dures required to maintain the compressor in proper operating condition. The importance of per-
forming the maintenance described herein cannot be over emphasized.
The periodic maintenance procedures to be performed on the equipment covered by this manual are
listed on the following page. It should be understood that the intervals between inspections specified
are maximum interval. More frequent inspections should be made if the unit is operating in a dusty
environment, in high ambient temperature, or in other unusual conditions. A planned program of
periodic inspection and maintenance will help avoid premature failure and costly repairs. Daily
visual inspections should become a routine.
PART NUMBER
80186
308157
301267
302936
For Parts and/or Service Support:
Phone: (800) 635-6587 (USA)
Phone: (219) 324-7776 (Outside USA)
Fax: (877) 254-4249 (USA)
service@bossair.com (Email)
http://www.bossair.com (Website)
Maintenance
Compressor must be shut down and completely relieved of pressure
prior to checking fluid levels. Open service valve to ensure relief of
system air pressure. Relieve all stored air pressure energy prior to
starting machine. Failure to comply with this warning will cause damage
to property and serious bodily harm.
Recommended Spare Parts List
KIT, REPAIR HYD MOTOR SEAL
How To Order Parts
DESCRIPTION
KIT, REPAIR REED VALVE
ELEMENT, AIR FILTER
SPIDER, CURVED JAW
17
308528
Advertisement
Table of Contents
