Inverter Configuration Menu Options - SolarEdge Solar Inverter Installation Manual

Chapter 5: User Interface

Inverter Configuration Menu Options

This section describes how to use the LCD menus for configuring the inverter. Configuration is only
available when the inverter ON/OFF switch is OFF. Use either the internal LCD user buttons or the external
LCD light button to move between and select menu options.
Country and Grid
Configuring the country and grid is available using the internal user buttons only.
1
Select the Country option to specify the country in which the inverter is installed and the grid to
which it is connected. This parameter may arrive pre-configured. If so, verify that it is set to the
proper country.
WARNING!
The inverter must be configured to the proper country in order to ensure that it complies with
the country grid code and functions properly with that country grids.
A list of countries is displayed. If no country is configured, the value is <NONE>.
NOTE:
If an inverter is not configured to any country, it will not produce energy, and the following
message will be displayed on the LCD: No Country Selected
A plus sign (+) near the country indicates that another menu is available for selecting grid options.
2
Confirm your country selection in the confirmation screen: Toggle to YES and press Enter.
Language
1
Select the Language option to set the language in which the LCD should display.
2
Confirm your language selection in the confirmation screen: Toggle to YES and press Enter.
Communication
1
Select the Communication option to define and configure the communication option used by the
inverter to communicate with the SolarEdge monitoring portal and the communication option used
to communicate between multiple inverters.
2
Select Server to set which communication method is used to communicate between the inverter and
the SolarEdge monitoring portal. Refer to Chapter 6: Setting Up Communication on page 41 for a full
description of these communication options.
NOTE:
This menu shows only the communication options installed in the inverter.
3
The following shows a hierarchical tree of the menu options in the Communication menu. For
detailed information about all the configuration options, refer to the Communication Options
Application Note, available on the SolarEdge website at
http://www.solaredge.com/files/pdfs/solaredge-
communication_options_application_note_v2_250_and_above.pdf.
SolarEdge Installation Guide – MAN-01-00057-2.2
33