Wall Mounting - Dimplex Girona GFP050 W Operating Instructions Manual

General
The heater is designed for wall mounting on the
wall bracket supplied. It should only be operated
when in the upright position as shown - see Fig.1
and Fig.2.
All models are splashproof to IPX4 standard
and may be used in bathrooms, however not in
the immediate vicinity of baths, showers, water
connections, wash basins or swimming pools.
Before connecting the heater check that the supply
voltage is the same as that stated on the heater.
Dimensions
(millimetres)
Model(s) Watt
GFP050 W/B 0.5 kW
GFP075 W/B 0.75 kW
GFP100 W/B 1.0 kW
GFP150 W/B 1.5 kW
GFP200 W/B 2.0 kW

Wall Mounting

IMPORTANT – The wall bracket supplied with
the appliance must be used. The heater should
be positioned observing the minimum clearances
stated around the heater - see Fig. 1 and Fig. 2.
DO NOT locate the heater immediately below a
fixed socket outlet or connection box.
1. Remove the wall mounting bracket from the
back of the heater by depressing the spring latch
at the top of each bracket - see Fig. 3.
2. Fix the wall bracket securely to the wall through
the four screw holes provided.
3. Present the heater to the wall bracket, and
engage lower slots in the back with bracket.
4. Raise the heater to upright position and push
the heater onto bracket to engage top latches.
A (mm) B (mm)
530 107
530 107
700 107
770 107
940 107
A
150
Min.
shelf
300 Min.
B
GFP050 390
GFP075 390
GFP100
GFP150
GFP200
D
255 Min.
565
150 Min.
Fig. 1
Fig. 2
C D
300
300
560 300
630 300
800 300
C
Fig. 3