Connecting The Power Cord; Binding Cables - Sharp PN-H701 Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.
Power cord (Supplied)
Power cord clamp screw
Power cord clamp
Caution
• Do not tighten the screw excessively. Excessive
tightening may damage the monitor.
*1
Cable
Cable clamp
attachment
Cable clamp
14
E

Connecting the Power Cord

Binding Cables

Main power switch
1
3 For power
outlet
*2 *2
*2
Cable clamp
(insertion type)
Cable clamp
attachment
AC input terminal
2
Power cord (Supplied)
*1
*1
*1
*1
*1
*1 *1
*1
*2
Cable