Monitor Out - Hitachi CP-WX625 User Manual – Operating Manual

SETUP Menu (continued)
Item
KEYSTONE
WHISPER
MIRROR

MONITOR OUT

(continued on next page)
Using the ▲/▼ buttons corrects the horizontal keystone distortion.
Shrink the right of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• When the vertical lens shift is not set fully upward (not set fully
downward for the optional lens type FL-601 only (
function may not work well.
• This function will be unavailable when the Transition Detector is
53).
on (
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL H:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (
projector is restarted after the power switch is turned off.
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
QUIT RGB1
STANDBY VIDEO
• Choose STANDBY, to select the output signal from the MONITOR
OUT port in the standby mode.
• While QUIT is selected, pressing the ◄
button returns to the previous menu.
(2) Select one of the RGB ports using ◄/►
buttons.
RGB1 RGB2
• OFF disables the MONITOR OUT port.
Description
Shrink the left of the image
V:INVERT
53) will be displayed when
RGB2 HDMI
S-VIDEO COMPONENT(Y, C
OFF
SETUP Menu
47)), this
H&V:INVERT
/P , C
B B R
/P )
R
37