Searching An Input Signal; Selecting An Aspect Ratio - Hitachi CP-WX625 User Manual – Operating Manual

Operating
Selecting an input signal (continued)
Press the VIDEO button on the remote control to select an
1.
input for video signal.
Each time you press the button, the projector switches its
video input port as below.
COMPONENT (Y, C
● While TURN ON is selected for AUTO SEARCH item in OPTION Menu, the
projector will keep checking every port sequentially till an input signal is detected
44). If VIDEO button is pushed when RGB 1 or RGB 2 port is selected, the
(
projector will check COMPONENT port first.
Press the MY SOURCE / DOC. CAMERA button on the
1.
remote control. The input signal will be changed into the
signal you set as MY SOURCE(
● This function also can use for document camera. Select the input port that
connected the document camera.

Searching an input signal

Press the SEARCH button on the remote control.
1.
The projector will start to check its input ports in order to find
any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
RGB 1 RGB 2

Selecting an aspect ratio

Press the ASPECT button on the remote control.
1.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
For an RGB signal
NORMAL
For an HDMI signal
NORMAL
For a video signal, s-video signal or component video signal
4:3 16:9
For no signal
16:10 (fixed)
● The NORMAL mode keeps the original aspect ratio of the signal.
18
/P , C /P )
B B R R
HDMI COMPONENT (Y, C
4:3 16:9 16:10
4:3 16:9 16:10
16:10 14:9
S-VIDEO VIDEO
46).
/P , C
B B R
REAL
14:9 REAL
REAL
STANDBY/ON
STANDBY/ON
STANDBY/ON
/P ) S-VIDEO
R
ASPECT
LASER
INDICATOR
VIDEO RGB
MY SOURCE/
DOC.CAMERA
LASER
INDICATOR
VIDEO RGB
MY SOURCE/
DOC.CAMERA
LASER
INDICATOR
VIDEO RGB
MY SOURCE/
DOC.CAMERA
SEARCH
VIDEO