1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-WX625
  6. User manual

Hitachi CP-WX625 - WXGA LCD Projector User Manual

User manual
Hide thumbs Also See for CP-WX625 - WXGA LCD Projector:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Manual
Projector
CP-WX625
User's Manual (detailed) – Operating Guide
Thank you for purchasing this projector.
WARNING
WARNING
CAUTION
NOTE
Trademark acknowledgment
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-WX625 - WXGA LCD Projector

Summary of Contents for Hitachi CP-WX625 - WXGA LCD Projector

  • Page 1 Projector CP-WX625 User's Manual (detailed) – Operating Guide Thank you for purchasing this projector. WARNING WARNING CAUTION NOTE Trademark acknowledgment...

  • Page 2: Contents

    Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.

  • Page 3: Safety Precautions

    Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
  • Page 4 Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
  • Page 5 Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
  • Page 6 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
  • Page 7 Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
  • Page 8 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
  • Page 9 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.

  • Page 10: Regulatory Notices

    Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Table Of Contents

    Contents About this manual... 1 IRROR ESET ILTER TIME Contents ....2 , Go to Advanced Menu... ANGUAGE Projector features.

  • Page 12: Contents

    Projector features / Preparations Contents of package NOTE Fastening the lens cover...

  • Page 13: Part Names

    Part names Projector HOT! HOT! WARNING HOT! CAUTION...

  • Page 14: Control Panel

    Part names Control panel 16, 69 Rear panel RGB1 HDMI VIDEO AUDIO IN1 RGB2 AUDIO IN2 S-VIDEO AUDIO OUT REMOTE AUDIO IN3 AUDIO IN4 CONTROL CONTROL AC IN CAUTION...

  • Page 15: Remote Control

    Part names Remote control LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA SEARCH BLANK LASER ASPECT ENTER PUSH PAGE UP PAGE DOWN MENU RESET POSITION AUTO PbyP MAGNIFY MY BUTTON VOLUME FREEZE KEYSTONE MUTE WARNING CAUTION...
  • Page 16 Setting up WARNING CAUTION...
  • Page 17 Setting up Arrangement On a horizontal surface (c) up (c) down Suspended from the ceiling (c) down (c) up...
  • Page 18 Setting up Adjusting the projector's elevator 10° CAUTION Using the security bar and slot WARNING NOTE...
  • Page 19 Setting up Connecting your devices AUDIO OUT RGB OUT AUDIO OUT RGB OUT RS-232C HDMI USB-A LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA SEARCH BLANK LASER RGB1 HDMI ASPECT VIDEO PUSH ENTER PAGE UP PAGE DOWN MENU RESET AUDIO IN1 RGB2 POSITION AUTO...
  • Page 20 Setting up Connecting your devices (continued) NOTE About Plug-and-Play capability NOTE for HDMI...

  • Page 21: Connecting Power Supply

    Setting up Connecting power supply WARNING...

  • Page 22: Laser Pointer

    Remote control Laser pointer WARNING CAUTION Installing the batteries (HITACHI MAXELL, Part No.LR6 or R6P) WARNING...

  • Page 23: About The Remote Control Signal

    Remote control About the remote control signal The front and top sensors: The back sensor: 30º 30º NOTE 30º 30º 20º 20º Changing the frequency of remote control signal...

  • Page 24: Using As A Wired Remote Control

    Remote control Using as a wired remote control AUDIO OUT REMOTE CONTROL DIO IN4 NOTE Using as a simple PC mouse & keyboard (1) Mouse left button (2) Mouse right button LASER INDICATOR BLANK LASER STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA SEARCH (3) Lever switch BLANK...

  • Page 25: Power On/Off

    Power on/off Contents Turning on the power LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA SEARCH BLANK LASER ASPECT PUSH ENTER PAGE UP PAGE DOWN MENU RESET POSITION AUTO PbyP MAGNIFY MY BUTTON VOLUME FREEZE KEYSTONE MUTE 17,18 Turning off the power WARNING NOTE...

  • Page 26: Operating

    Operating Adjusting the volume MENU RESET PbyP POSITION AUTO MAGNIFY MY BUTTON VOLUME Temporarily muting the sound FREEZE KEYSTONE MUTE Selecting an input signal LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA...

  • Page 27: Searching An Input Signal

    Operating Selecting an input signal (continued) LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA Searching an input signal LASER INDICATOR STANDBY/ON VIDEO MY SOURCE/ DOC.CAMERA SEARCH Selecting an aspect ratio For an RGB signal For an HDMI signal ASPECT For a video signal, s-video signal or component video signal...
  • Page 28 Operating Adjusting the zoom and focus Adjusting the lens shift 1/10 NOTE 1/10 Using the automatic adjustment feature PUSH ENTER PAGE UP PAGE DOWN For an RGB signal MENU RESET POSITION AUTO PbyP MY BUTTON VOLUME MAGNIFY For a video signal and s-video signal For a component video signal...
  • Page 29 Operating Adjusting the position PUSH ENTER PAGE UP PAGE DOWN MENU RESET POSITION AUTO PbyP MAGNIFY MY BUTTON VOLUME Correcting the keystone distortions FREEZE KEYSTONE MUTE...

  • Page 30: Using The Magnify Feature

    Operating Using the magnify feature MENU RESET PbyP POSITION AUTO MY BUTTON VOLUME MAGNIFY FREEZE KEYSTONE MUTE NOTE Freezing the screen MY BUTTON VOLUME MAGNIFY FREEZE KEYSTONE MUTE...

  • Page 31: Temporarily Blanking The Screen

    Operating Temporarily blanking the screen MY SOURCE/ DOC.CAMERA SEARCH BLANK LASER NOTE...
  • Page 32 Operating PbyP (Picture by Picture) PbyP PbyP PbyP Starting the PbyP PbyP PbyP PbyP Showing the setting information PbyP Changing the main area Changing the picture input signal PbyP Using the PbyP SWAP function PbyP SWAP NOTE PbyP...

  • Page 33: Using The Menu Function

    Operating Using the menu function LASER INDICATOR STANDBY/ON VIDEO PUSH ENTER MY SOURCE/ DOC.CAMERA SEARCH BLANK LASER PAGE UP PAGE DOWN MENU RESET ASPECT PUSH ENTER PAGE UP PAGE DOWN POSITION AUTO PbyP MENU RESET POSITION AUTO PbyP MY BUTTON VOLUME MAGNIFY MY BUTTON...

  • Page 34: Easy Menu

    EASY MENU Item Description ASPECT AUTO KEYSTONE EXECUTE KEYSTONE KEYSTONE PICTURE MODE 27, 28...
  • Page 35 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu...

  • Page 36: Picture Menu

    PICTURE Menu Item Description BRIGHTNESS CONTRAST To adjust CUSTOM GAMMA...

  • Page 37: Picture Menu

    PICTURE Menu PICTURE Menu (continued) Item Description #1 HIGH #1 CUSTOM #2 MID #2 CUSTOM #3 LOW #3 CUSTOM #6 CUSTOM #6 Hi-BRIGHT-3 #4 Hi-BRIGHT-1 #5 CUSTOM #5 Hi-BRIGHT-2 #4 CUSTOM To adjust CUSTOM COLOR TEMP COLOR TINT SHARPNESS...
  • Page 38 PICTURE Menu PICTURE Menu (continued) Item Description ACTIVE IRIS LOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MEMORY SAVE-1, SAVE-2, SAVE-3, SAVE-4...

  • Page 39: Image Menu

    IMAGE Menu Item Description For an RGB signal For an HDMI signal ASPECT For a Video signal, S-video signal or Component video signal For no signal OVER SCAN V POSITION above H POSITION above...
  • Page 40 IMAGE Menu IMAGE Menu (continued) Item Description H PHASE H SIZE For an RGB signal For a video signal and s-video signal AUTO ADJUST EXECUTE For a component video signal...

  • Page 41: Input Menu

    INPUT Menu Item Description PROGRESSIVE VIDEO NR 3D-YCS COLOR SPACE...

  • Page 42: Video Format

    INPUT Menu INPUT Menu (continued) Item Description AUDIO IN 1 VIDEO COMPONENT AUDIO IN 2 S-VIDEO AUDIO IN 3 AUDIO IN 4 SCART OUT VIDEO FORMAT HDMI...
  • Page 43 INPUT Menu INPUT Menu (continued) Item Description FRAME LOCK RGB IN...
  • Page 44 INPUT Menu INPUT Menu (continued) Item Description RESOLUTION...

  • Page 45: Setup Menu

    SETUP Menu Item Description AUTO KEYSTONE EXECUTE KEYSTONE...

  • Page 46: Whisper

    SETUP Menu SETUP Menu (continued) Item Description KEYSTONE WHISPER MIRROR MONITOR OUT...

  • Page 47: Audio Menu

    AUDIO Menu NOTE Item Description VOLUME TREBLE BASS SRS WOW ® SPEAKER AUDIO HDMI AUDIO...

  • Page 48: Screen Menu

    SCREEN Menu Item Description LANGUAGE MENU POSITION BLANK...

  • Page 49: Start Up

    SCREEN Menu SCREEN Menu (continued) Item Description START UP...
  • Page 50 SCREEN Menu SCREEN Menu (continued) Item Description MyScreen below MyScreen Lock...

  • Page 51: Message , S

    SCREEN Menu SCREEN Menu (continued) Item Description MESSAGE SOURCE NAME...
  • Page 52 SCREEN Menu SCREEN Menu (continued) Item Description TEMPLATE...
  • Page 53 OPTION Menu Item Description AUTO SEARCH AUTO KEYSTONE AUTO ON...

  • Page 54: Option Menu

    OPTION Menu OPTION Menu (continued) Item Description AUTO OFF LAMP TIME 63, 64 FILTER TIME...
  • Page 55 OPTION Menu OPTION Menu (continued) Item Description MY BUTTON 6, 18 MY SOURCE SERVICE FAN SPEED...
  • Page 56 OPTION Menu OPTION Menu (continued) Item Description AUTO ADJUST GHOST FILTER MESSAGE SERVICE LENS TYPE...
  • Page 57 OPTION Menu OPTION Menu (continued) Item Description KEY LOCK REMOTE RECEIV. REMOTE FREQ. SERVICE (continued) INFORMATION FACTORY RESET...
  • Page 58 OPTION Menu OPTION Menu (continued) Item Description 1. Using Security Features 1.1 Inputting the PASSWORD 1100 SECURITY 1.2 Changing the PASSWORD...
  • Page 59 OPTION Menu OPTION Menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 2. Using the MyScreen PASSWORD Function SECURITY PASSWORD 2.1 Turning on the MyScreen (continued) Function 2.2 Setting the PASSWORD...
  • Page 60 OPTION Menu OPTION Menu (continued) Item Description 2.3 Turning the PASSWORD off SECURITY (continued) 2.4 If you have forgotten your PASSWORD 3. Using the PIN LOCK Function 3.1 Registering the PIN Code...
  • Page 61 OPTION Menu OPTION Menu (continued) Item Description SECURITY (continued) 3.2 Turning Off the PIN LOCK Function 3.3 If you have forgotten your PIN Code...
  • Page 62 OPTION Menu OPTION Menu (continued) Item Description 4. Using the Transition Detector Function Transition Detector 4.1 Turning On the Function SECURITY (continued) 4.2 Setting the Transition Detector PASSWORD...
  • Page 63 OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.4 If you have forgotten your PASSWORD 5. Using the MY TEXT PASSWORD function 5.1 Writing the MY TEXT SECURITY (continued)
  • Page 64 OPTION Menu OPTION Menu (continued) Item Description 5.2 Displaying the MY TEXT 5.3 Turning on the MY TEXT PASSWORD SECURITY (continued)
  • Page 65 OPTION Menu OPTION Menu (continued) Item Description SECURITY (continued)

  • Page 66: Network Menu

    NETWORK Menu NOTE Date/Time Settings of the User’s Manual - Network Guide) Item Description SETUP DHCP (Dynamic Host Protocol)

  • Page 67: Network Menu

    NETWORK Menu NETWORK Menu (continued) Item Description ADDRESS SUBNET MASK DEFAULT GATEWAY SETUP SERVER TIME DIFFERENCE DATE TIME Date/Time Settings of the User’s Manual - Network Guide)
  • Page 68 NETWORK Menu NETWORK Menu (continued) Item Description PROJECTOR NAME...
  • Page 69 NETWORK Menu NETWORK Menu (continued) Item Description MY IMAGE (Still Image Transfer) Display of the User’s Manual - Network Guide) To switch the image displayed MY IMAGE To return to the menu...

  • Page 70: Information

    NETWORK Menu NETWORK Menu (continued) Item Description INFORMATION SERVICE...

  • Page 71: Closed Caption) Menu

    C.C. (Closed Caption) Menu Item Description DISPLAY MODE CHANNEL...

  • Page 72: Maintenance

    Maintenance Lamp Type number = DT00873 Replacing the lamp In case of replacement by yourself, NOTE...

  • Page 73: Lamp Warning

    Maintenance Lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING About disposal of a lamp:...
  • Page 74 Maintenance Type number = MU05661 WARNING NOTE...

  • Page 75: Internal Clock Battery

    Maintenance Internal clock battery OPEN Replace battery with HITACHI MAXELL, Part No.CR2032 only. CLOSE WARNING NOTE Date/Time Settings in the User's Manual (detailed) - Network Guide)

  • Page 76: Other Care

    Maintenance Other care Inside of the projector Caring for the lens Caring for the cabinet and remote control WARNING CAUTION...

  • Page 77: Troubleshooting

    Troubleshooting Related messages Message Description There is no input signal. The horizontal or vertical frequency of the input signal An improper signal is input. The internal temperature is rising. 26, 45...

  • Page 78: Regarding The Indicator Lamps

    Troubleshooting Regarding the indicator lamps Description indicator indicator indicator The projector is in a standby state. Orange Blinking The projector is warming up. Green The projector is in an on state. Green Blinking The projector is cooling down. Orange The projector is cooling down. A certain error has been detected.
  • Page 79 Troubleshooting Regarding the indicator lamps (continued) Description indicator indicator indicator The cooling fan is not operating. Blinking Blinking There is a possibility that the interior portion has become heated. Blinking Green blinking in There is a possibility that the interior portion has become overcooled.

  • Page 80: Phenomena That May Be Easy To Be Mistaken For Machine Defects

    Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING Reference Phenomenon Cases not involving a machine defect page The electrical power cord is not plugged in. The power switch is not set to the on position. The main power source has been interrupted during operation such as by a power outage (blackout), etc.
  • Page 81 Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. The MUTE function is working. The AUDIO setting is not correct. The audio on your HDMI equipment is not set to Linear PCM. The audio on the HDMI input is muted.
  • Page 82 Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Color settings are not correctly adjusted. COLOR SPACE setting is not suitable. The brightness and/or contrast are adjusted to an The WHISPER function is working.
  • Page 83 Item Lamp: NOTE...
  • Page 84 CONTROL CONTROL AUDIO AUDIO REMOTE AUDIO S-VIDEO AUDIO RGB2 AUDIO VIDEO HDMI RGB1...
  • Page 85 Projector CP-WX625 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. Web control MY IMAGE (Still Image Transfer) Display WARNING NOTE this manual. Trademark acknowledgment...
  • Page 86 Content Content Content ..................2 1. Main functions ................3 ........... 3 ........... 3 2. Equipment connection and network setting......4 ..............4 2.2 Manual network connection setting............. 5 ................. 5 ..................5 ................. 8 2.2.4 Check connection.................. 9 3. Management with Web browser software ......10 ....

  • Page 87: Main Functions

    1. Main functions 1. Main functions 1.2 MY IMAGE (Still image Transfer) Display...

  • Page 88: Equipment Connection And Network Setting

    2. Equipment connection and network setting 2.1 Required equipment preparation the network. NOTE...

  • Page 89: Manual Network Connection Setting

    2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection 2.2.2 Network settings...
  • Page 90 2. Equipment connection and network setting 2.2 Manual network connection setting (continued)
  • Page 91 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] For example NOTE...
  • Page 92 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.3 “Internet Option” setting Click Click...

  • Page 93: Check Connection

    2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2.2.4 Check connection...

  • Page 94: Management With Web Browser Software

    3. Management with Web browser software browser software. E-mail Alerts Projector Management using SNMP MY IMAGE (Still Image Transfer) Display...
  • Page 95 3. Management with Web browser software browser NOTE...

  • Page 96: Projector Control

    3. Management with Web browser software Item Description Administrator User Network Information Network Settings settings. Port Settings communication port settings. Mail Settings Alert Settings warning alerts. Schedule Settings settings. Date/Time Settings time settings. Security Settings Projector Control Controls the projector. Projector Status Network Restart connection.
  • Page 97 3. Management with Web browser software 3.1.1 Logon Example 192.168.1.10: “http://192.168.1.10/” key or click “ [Logon]. Item Password <blank> <blank> Main menu Main menu...
  • Page 98 3. Management with Web browser software 3.1.2 Network Information 12,13 Item Description Projector Name DHCP IP Address Subnet Mask Default Gateway MAC Address Firmware Date Firmware Version...
  • Page 99 3. Management with Web browser software 3.1.3 Network Settings Item Description DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector Name sysLocation (SNMP) sysContact (SNMP) The length of the sysContact can be up to 255 alphanumeric DNS Server Address Click [Apply] NOTE restart the network connection.
  • Page 100 3. Management with Web browser software 3.1.4 Port Settings Item Description Network Control Port1 (Port:23) Port open Click [Enable] Click [Enable] Authentication this port. Network Control Port2 (Port:9715) Port open Click [Enable] Click [Enable] Authentication this port. Image Transfer Port (Port:9716) Port open Click the [Enable]...
  • Page 101 3. Management with Web browser software 3.1.5 Mail Settings Item Description Click [Enable] Send mail SMTP Server IP Address Network Settings to 255 characters. Sender E-mail address alphanumeric characters. can also specify [TO] or [CC] Recipient E-mail address characters. Click [Apply] NOTE [Send Test Mail]...
  • Page 102 3. Management with Web browser software 3.1.6 Alert Settings Alert Item Description Cover Error Fan Error The cooling fan is not operating. Lamp Error There is a possibility that the interior portion has become Temp Error Air Flow Error The internal temperature is rising. Lamp Time Error There is a possibility that the interior portion has become Cold Error...
  • Page 103 3. Management with Web browser software Setting Item Description Alarm Time Lamp Time Alarm Filter Time Alarm SNMP Trap Click [Enable] Click [Enable] Send Mail Cold Start Authentication Failure The length of the subject line can be up to 100 alphanumeric Mail Subject characters.
  • Page 104 3. Management with Web browser software 3.1.7 Schedule Settings Item Description Daily Sunday Monday Tuesday Wednesday Thursday Friday Saturday...
  • Page 105 3. Management with Web browser software The schedule settings are shown below. Item Description Schedule Click [Enable] check box to enable the schedule. Date (Month/Day) selected. Click [Apply] button to save the settings. Item Description Time Command [Parameter] Power Input Source Display Image data Click [Register]...
  • Page 106 3. Management with Web browser software 3.1.8 Date/Time Settings Item Description Current Date year/month/day format. Current Time hour:minute:second format. Click [ON] Daylight Savings Time the following items. Start Month Week hour Time minute Month Week hour Time minute...
  • Page 107 3. Management with Web browser software Item Description Time difference manager. Click the [ON] SNTP SNTP Server IP Network Address Settings to 255 characters. Cycle hour:minute Click [Apply] NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
  • Page 108 3. Management with Web browser software 3.1.9 Security Settings Item Description Administrator authority Administrator ID characters. Administrator Password characters. Re-enter Administrator Password User authority User ID characters. User Password characters. Re-enter User Password...
  • Page 109 3. Management with Web browser software Item Description Network Control control. Authentication Password Re-enter Authentication Password SNMP Community name be up to 64 alphanumeric characters. Click [Apply NOTE restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
  • Page 110 3. Management with Web browser software 3.1.10 Projector Control The items shown in the table below can be on the PC. NOTE [Refresh] button. Controls the projector. Item Description Main Power Input Source Picture Mode Blank On/Off Mute Freeze Controls the magnify setting. Magnify Picture Brightness...
  • Page 111 3. Management with Web browser software Item Description Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Execute Input Progressive Video NR 3D-YCS Color Space Component port setting. C-Video Format S-Video Format HDMI Frame Lock-RGB1 Frame Lock-RGB2 Frame Lock-HDMI RGB in-1...
  • Page 112 3. Management with Web browser software Item Description Audio Volume Treble Bass SRS WOW Speaker Audio-RGB1 input port. Audio-RGB2 input port. Audio-HDMI input port. Audio-Component input port. Audio-S-Video input port. Audio-Video input port. Audio Out Standby Assigns the HDMI Audio Screen Language Menu Position V...
  • Page 113 3. Management with Web browser software Option Auto Search Auto Keystone Auto on Auto off Assigns the functions for the button on the My Button-1 Assigns the functions for the button on the My Button-2 My Source Remote Receiv. Front Remote Receiv.
  • Page 114 3. Management with Web browser software 3.1.11 Projector Status Item Description Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze...
  • Page 115 3. Management with Web browser software 3.1.12 Network Restart Item Description Restart NOTE [Restart] button to log on again. 3.1.13 Logoff [Logoff]...
  • Page 116 3. Management with Web browser software 3.2 E-mail Alerts NOTE power. Mail Settings ( through a web browser. Example 192.168.1.10: “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] [Apply] NOTE SMTP Port [Network Restart] items. [Mail Settings] 3.1.5 Mail 17) for further information.
  • Page 117 3. Management with Web browser software 3.2 E-mail Alerts (continued) [Alert Settings] 3.1.6 Alert Settings ( for further information. [Apply]...

  • Page 118: Projector Management Using Snmp

    3. Management with Web browser software 3.3 Projector Management using SNMP to use this function. NOTE SNMP Settings ( Example 192.168.1.10: “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] SNMP Port NOTE SNMP Port [Network Restart] following items. [Security Settings] on the main menu. [SNMP] NOTE Community name has been...
  • Page 119 3. Management with Web browser software NOTE...
  • Page 120 3. Management with Web browser software Schedule Settings ( Example 192.168.1.10: “http://192.168.1.10/” [Logon]. [Schedule Settings] select [Sunday]. [Enable] [Apply] [Register] [Delete] NOTE...
  • Page 121 3. Management with Web browser software Date/Time Settings ( Example 192.168.1.10: “http://192.168.1.10/” [Logon]. [Date/Time Settings] to the item 3.1.8 Data/Time Settings for further information. [Apply] NOTE Daylight Savings Time or SNTP following...
  • Page 122 3. Management with Web browser software 3.5 MY IMAGE (Still Image Transfer) Display NOTE...
  • Page 123 3. Management with Web browser software Example 192.168.1.10: "http://192.168.1.10/" click [Logon]. [Port Settings] on the main menu. [Enable] Image Transfer Port (Port: 9716). Click the [Enable] [Authentication] setting when [Apply] [Security Settings] on the main menu. [Network Control] [Apply] NOTE Network Control Port1 (Port: 23) Network Control Port2 (Port: 9715) Image Transfer...
  • Page 124 3. Management with Web browser software Communication Port NOTE Command Control Settings ( Example 192.168.1.10: “http://192.168.1.10/” [Logon]. [Port Settings] on the main menu. [Enable] Network Control Port1 (Port: 23) to [Enable] [Authentication] setting when [Enable] Network Control Port2 (Port: 9715) to [Enable] [Authentication] setting when [Apply]...
  • Page 125 3. Management with Web browser software [Security Settings] on the main menu. [Network Control] [Apply] NOTE Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715) Image Transfer Port (Port: 9716). the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.
  • Page 126 3. Management with Web browser software Command Format Reply Error code Send Data format Connection Header Data length RS-232C command Check Sum 13 bytes 1 byte 1 byte...
  • Page 127 3. Management with Web browser software Reply Data format Connection Reply 1 byte Connection Reply 1 byte Connection Reply Error code 2 bytes 1 byte Connection Reply Data 2 bytes 1 byte <Projector busy reply> Connection Reply Status code 2 bytes 1 byte <Authentication error reply>...
  • Page 128 3. Management with Web browser software Authentication NOTE...
  • Page 129 Projector CP-WX625 User's Manual – Operating Guide Technical Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz)
  • Page 130 Initial set signals Display interval (C) Display interval (c) H. Sync. V. Sync. Sync (A) Sync (a) Vertical signal timing (lines) Signal Signal TEXT 20.3 TEXT VGA (60Hz) 25.4 VGA (60Hz) VGA (72Hz) 20.3 VGA (72Hz) VGA (75Hz) 20.3 VGA (75Hz) VGA (85Hz) 17.8 VGA (85Hz)
  • Page 131 Connection to the ports RGB1 HDMI VIDEO AUDIO IN1 RGB2 AUDIO IN2 S-VIDEO AUDIO OUT REMOTE CONTROL AUDIO IN3 AUDIO IN4 CONTROL RGB 1, RGB OUT Signal Signal Video Red Video Green 10 Ground Ground Ground Red 14 V. sync. Ground Green RGB 2(G/Y, B/C , R/C...

  • Page 132: Component Video

    Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN1 RGB2 AUDIO IN2 S-VIDEO AUDIO OUT REMOTE CONTROL AUDIO IN3 AUDIO IN4 CONTROL COMPONENT VIDEO Signal S-VIDEO Signal Ground Ground VIDEO...

  • Page 133: Audio Out

    Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN1 RGB2 AUDIO IN2 S-VIDEO AUDIO OUT REMOTE CONTROL AUDIO IN3 AUDIO IN4 CONTROL AUDIO IN 1, AUDIO IN 2 AUDIO IN 3 L, AUDIO IN 4 AUDIO OUT REMOTE CONTROL CONTROL Signal Signal...
  • Page 134 Connection to the ports (continued) RGB1 HDMI VIDEO AUDIO IN1 RGB2 AUDIO IN2 S-VIDEO AUDIO OUT REMOTE CONTROL AUDIO IN3 AUDIO IN4 CONTROL Signal 1 +5V 4 Ground Signal Signal Signal 1 TX+ 2 TX- 3 RX+ 6 RX-...

  • Page 135: Communications Setting

    RS-232C Communication RS-232C Communication RTS (7) (7) RTS Connecting the cable Communications setting 1. Protocol 2. Header 3. Command data Action Setting code Action Content EXECUTE Run a command.
  • Page 136 RS-232C Communication (continued) Requesting projector status (Get command) Changing the projector settings (Set command) Using the projector default settings (Reset Command) Increasing the projector setting value (Increment command) Decreasing the projector setting value (Decrement command) When the projector cannot understand the received command When the projector cannot execute the received command.
  • Page 137 Command Control via the Network Communication Port Command Control Settings Port Settings [Enable] [Network Control Port1 (Port: 23)] Network Control [Enable] Port1 (Port: 23) [Authentication] is required. [Enable] [Network Control Port2 (Port: 9715)] Network Control Port2 (Port: 9715) [Enable] [Authentication] is required.

  • Page 138: Protocol

    Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol 2. Header 3. Command data Action Setting code Action Content Execute Run a command. Requesting projector status (Get command) Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) ‘1DH’...

  • Page 139: Command Data

    Command Control via the Network (continued) Decreasing the projector setting value (Decrement command) Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) ‘06H’ When the projector cannot understand the received command ‘15H’ ‘15H’ When the projector cannot execute the received command. ‘1CH’...
  • Page 140 Command Control via the Network (continued) 7. Reply Data ‘06H’ + ‘xxH’ ‘15H’ + ‘xxH’ ‘1CH’ + ‘xxxxH’ + ‘xxH’ ‘1DH’ + ‘xxxxH’ + ‘xxH’ ‘1FH’ + ‘xxxxH’ + ‘xxH’ ‘1FH’ + ‘0400H’ + ‘xxH’ (‘xxH’ Automatic Connection Break Authentication NOTE...
  • Page 141 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code Power TURN OFF BE EF 06 00 2A D3 01 00 00 60 00 00 TURN ON BE EF 06 00 BA D2 01 00 00 60 01 00 BE EF...
  • Page 142 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code GAMMA #1 DEFAULT BE EF 06 00 07 E9 01 00 A1 30 20 00 #2 DEFAULT BE EF 06 00 97 E8 01 00 A1 30 21 00 #3 DEFAULT...
  • Page 143 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP #1 HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 #2 MID BE EF 06 00 9B F4 01 00 B0 30 02 00...
  • Page 144 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code MY MEMORY Load BE EF 06 00 0E D7 01 00 14 20 00 00 BE EF 06 00 9E D6 01 00 14 20 01 00 BE EF 06 00...

  • Page 145: Set

    RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code COLOR SPACE AUTO BE EF 06 00 0E 72 01 00 04 22 00 00 BE EF 06 00 9E 73 01 00 04 22 01 00 SMPTE240 BE EF...

  • Page 146: Execute

    RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code AUTO KEYSTONE V Execute BE EF 06 00 E5 D1 06 00 0D 20 00 00 EXECUTE AUTO KEYSTONE V TURN OFF BE EF 06 00 EA D1 01 00...
  • Page 147 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code MONITOR OUT - RGB1 BE EF 06 00 2A F7 01 00 BF 20 00 00 STANDBY RGB2 BE EF 06 00 EA F5 01 00 BF 20 04 00...
  • Page 148 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code BASS - RGB1 BE EF 06 00 0D FB 02 00 80 20 00 00 Increment BE EF 06 00 6B FB 04 00 80 20 00 00 Decrement...
  • Page 149 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code SPEAKER TURN OFF BE EF 06 00 6E D5 01 00 1C 20 00 00 TURN ON BE EF 06 00 FE D4 01 00 1C 20 01 00 BE EF...
  • Page 150 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code REMOTE FRONT BE EF 06 00 FF 32 01 00 00 26 00 00 BE EF 06 00 6F 33 01 00 00 26 01 00 BE EF 06 00...
  • Page 151 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code BLANK On/Off TURN OFF BE EF 06 00 FB D8 01 00 20 30 00 00 TURN ON BE EF 06 00 6B D9 01 00 20 30 01 00...
  • Page 152 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code AUTO OFF BE EF 06 00 08 86 02 00 10 31 00 00 Increment BE EF 06 00 6E 86 04 00 10 31 00 00 Decrement BE EF...
  • Page 153 RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting Code MY SOURCE RGB1 BE EF 06 00 FA 38 01 00 20 36 00 00 RGB2 BE EF 06 00 3A 3A 01 00 20 36 04 00 HDMI...
  • Page 154 Hitachi, Ltd. Japan 292 Yoshida-cho Totsuka-ku, Yokohama-city Kanagawa 244-0817 HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens GREECE SL6 8ZE Tel: 1-6837200 UNITED KINGDOM...

Table of Contents