Electric wash pump:
1. Turn the machine upside down.
2. Release the pan.
3. Release the float.
4. Use pliers to open the clamps.
5. Remove the electric wash pump by disengaging the rubber support from its seat.
6. Disconnect the heating element earth connection.
7. Disconnect the resistor power supply.
8. Disconnect the motor feedback wire.
9. Disconnect the power to the motor.
10. Remove the electric wash pump.
Disassembly of the AC wash motor:
1. Turn the machine upside down.
2. Release the pan.
3. Pull out the rear foot adjustment rod.
4. Open the clamps and remove the AC wash motor hose.
5. Disconnect the motor terminal board.
6. Remove the three screws to dismantle the AC wash motor
7. Remove the AC wash motor, minding the O-rings.
Dismantling the Plinth
1. Open the door.
2. Remove the 2 screw (one each side) which fix the plinth to the dishwasher base.
3. Pull it gently at the bottom to release.
4. Remove completely.
Service Manual
Manual LFF 825 IT/HA
Edition
2008.04.01
22
Language
English