8. attacHING tHE NEEDLE
WarNING :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
9. SEttING tHE BoBBIN INto tHE BoBBIN caSE
B
C
10. aDJuStING tHE StItcH LENGtH
A
– 5 –
) Pass the thread through thread slt A , and pull
the thread n drecton B .
By so dong, the thread wll pass under the ten-
son sprng and come out from notch B .
2) Check that the bobbin rotates in the direction of
the arrow when thread C s pulled.